Rockwool Blanket with Foil
Rockwool Blanket with Foil – Thermal & Acoustic Insulation
Thermal Building Products supplies FRF Rockwool Blanket with Aluminium Foil Facing for HVAC ducts, industrial equipment, tanks and flexible thermal and acoustic insulation applications.
FRF standard blanket configurations include:
- 1.2 × 5.0 m – 30 / 50 mm thickness – 30 / 40 / 50 / 70 kg/m³
- 1.2 × 1.2 m – 30 / 50 / 70 / 100 mm thickness – 40 / 60 / 80 / 100 / 128 kg/m³
Contact our team to confirm current stock, specification and project pricing.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Enquire about this product
Rockwool Blanket with Foil – Thermal & Acoustic Insulation Supplier in UAE
Thermal Building Products supplies FRF (Fujairah Rock Wool Factory) Rockwool Blanket with Aluminium Foil Facing for thermal and acoustic insulation in HVAC, commercial and industrial applications.
The product is a flexible stone wool insulation blanket designed for applications where insulation needs to fit around ducts, equipment, tanks and curved or irregular surfaces.
FRF Rockwool Blanket conforms to ASTM C553, ASTM C665 and BS EN 13162.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Applications
FRF Rockwool Blanket with Foil can be used for:
- HVAC duct insulation
- Heating and ventilation systems
- Industrial equipment
- Tanks and vessels
- Boilers
- Valves and flanges
- Curved surfaces
- Irregularly shaped equipment
- Thermal insulation
- Acoustic insulation
Its flexible form makes it suitable for applications where rigid insulation boards may not be practical.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Standard FRF Blanket Sizes
FRF lists the following standard blanket configurations:
| Standard Size | Standard Thickness | Standard Density |
|---|---|---|
| 1.2 × 5.0 m | 30, 50 mm | 30, 40, 50, 70 kg/m³ |
| 1.2 × 1.2 m | 30, 50, 70, 100 mm | 40, 60, 80, 100, 128 kg/m³ |
These are standard FRF configurations. Current stock, size, thickness and density should be confirmed before ordering.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Facing Options
FRF Rockwool Blanket is available with different facing options:
| FRF Code | Facing |
|---|---|
| BXXX | Blanket without facing |
| B2XX | Aluminium foil facing on one side |
| B22X | Aluminium foil facing on both sides |
| BBXX | Black aluminium foil facing on one side |
This product page mainly covers Rockwool Blanket with Aluminium Foil Facing.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Product Options & Pricing
Rockwool Blanket with Foil is available in different sizes, thicknesses and density configurations depending on current stock and product availability.
Please select the required product variation on this page to view the current applicable price.
For bulk quantities, project requirements or current stock confirmation, please contact the Thermal Building Products team.
Thermal Conductivity
Typical FRF thermal-conductivity values are shown below:
| Mean Temperature | 40 kg/m³ | 60 kg/m³ | 80 kg/m³ | 100 kg/m³ | 128 kg/m³ |
|---|---|---|---|---|---|
| 24°C | 0.036 | 0.035 | 0.035 | 0.034 | 0.031 |
| 35°C | 0.037 | 0.036 | 0.036 | 0.035 | 0.032 |
| 50°C | 0.039 | 0.038 | 0.038 | 0.037 | 0.034 |
| 100°C | 0.047 | 0.046 | 0.044 | 0.043 | 0.042 |
| 150°C | 0.058 | 0.056 | 0.052 | 0.051 | 0.050 |
| 200°C | 0.070 | 0.067 | 0.063 | 0.060 | 0.058 |
| 250°C | 0.085 | 0.081 | 0.077 | 0.072 | 0.070 |
| 300°C | — | — | 0.092 | 0.085 | 0.081 |
Values are in W/mK.
FRF states that these are typical values measured according to ASTM C177 / ASTM C518.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Service Temperature
FRF states an operating temperature of 780°C when tested according to DIN 52271 at 80 mm thickness and 100 kg/m³ density.
The Rockwool fibres can withstand temperatures above 1000°C without melting.
For foil-faced products, the maximum service temperature of the facing and adhesive may be lower than the insulation itself, so the complete insulation system should be selected according to project requirements.
Source: FRF Rockwool Blanket Datasheet, April 2018.
HVAC Duct Installation Guidance
For foil-faced Rockwool Blanket used on HVAC ductwork:
- Make sure the duct surface is clean and dry before installation.
- Cut the insulation accurately to suit the duct dimensions.
- Fit the blanket closely without unnecessary gaps.
- Use suitable insulation pins or mechanical fixing where required by the approved project specification.
- Seal foil-facing joints with suitable aluminium foil tape.
- Make sure corners, joints and penetrations are properly sealed.
- Follow the approved project or consultant installation requirements for final fixing and pin spacing.
Note: Exact pin spacing and fixing details should follow the approved HVAC insulation system or project specification.
Fire & Material Properties
FRF Rockwool Blanket is described as non-combustible when tested according to:
- BS 476 Part 4
- ASTM E136
- BS EN ISO 1182
The datasheet also reports Class A1 reaction-to-fire performance according to BS EN 13501-1.
Source: FRF Rockwool Blanket Datasheet, April 2018.
Technical Documents
For technical specifications, refer to the following documents:
Frequently Asked Questions
What sizes are available?
FRF lists standard sizes of 1.2 × 5.0 m and 1.2 × 1.2 m, with different thickness and density combinations depending on the selected product.
What facing options are available?
FRF offers unfaced blankets, aluminium foil facing on one side, aluminium foil on both sides and black aluminium foil facing.
Is Rockwool Blanket suitable for HVAC ducts?
Yes. FRF lists heating, ventilation, air-conditioning and duct insulation among the suitable applications.
How are foil joints sealed?
For HVAC installations, foil-facing joints may be sealed using suitable aluminium foil tape according to the approved insulation system.
How can I check the current price?
Select the required product variation on the page to view the current applicable price.
What information should I provide for a quotation?
Please provide:
- Required size
- Thickness
- Density
- Facing
- Quantity
- Application
- Delivery location
This helps the team confirm the correct product, current availability and quotation.
Related Rockwool Products & Accessories
Explore our complete range of Rockwool insulation in the UAE for thermal, acoustic and fire-related insulation applications.
For rigid board insulation applications, see our Fujairah Rockwool Slab.
For industrial pipe insulation, view our Fujairah Rockwool Pipe Section.
For reinforced industrial insulation applications, see our Rockwool Blanket with Wire Mesh.
For installation accessories, explore our Insulation Pins and Thermal Insulation Tapes categories.
Contact
For current stock, product specifications and project quotations:
Mr. Shadab – +971 50 850 2300






Reviews
There are no reviews yet.